Publicité
Les langues disponibles
Les langues disponibles
Three style
baby swing, highchair, booster 3 in 1
baby swing
Standard configuration pares
1.Frame
2.Seat
1
2
6.
7.Belt(Booster use)
AC-DC Power adapter
6
*The picture is for reference only,
please refer to the real object.
04
highchair
booster
3.Hanging tube(L+R)
4.Footrest
L
R
3
4
8.Toy bar
Remote control
9.
8
*2 toys are included. The pictures
7
are for reference only, please refer
to the real object.
Installation Instructions
1.Installation of Rocking Chair: As shown in the figure, hold the button on the
horizontal tube of the rear leg and pull the support tube back until you hear the
"click" sound, which means you pull it in place; then adjust the upper boxes on
both sides to the highest gear, the 8th gear (as shown in Fig. c).
5.Front tray
2.To install the spreader rod, align the left and right spreader rod with the
corresponding markings on the left and right upper boxes and press them
inward until you hear a "click" indicating that the rod is in place. Note: Incorrect
alignment will prevent the rod from being installed.
5
a
9
Click
OK
Click
OK
b
OK
8
1
R
R
L
L
2
05
Publicité
