Publicité
Les langues disponibles
Les langues disponibles
2
c.
Start with the end of the Plate that is furthest
inboard. There are four mounting holes along the
edge of the Plate, with two holes on each side. Mark
one of the two holes on each side of the Plate. The
pattern does not need to be symmetrical, as long as
there is at least one mounting bolt used on each side.
d.
In the center of the Plate, there are another four
mounting holes, with two on each side of the Plate.
Mark one of the two holes on each side of the Plate.
The pattern does not need to be symmetrical, as
long as there is at least one mounting bolt used on
each side.
3
e.
Finish with the end of the Plate that is furthest
outboard. When selecting a mounting hole pattern,
note that at least one outside mounting hole must
always be used. Depending on the available space
of the bow, there are three potential mounting
hole patterns:
Option #1: Mark both outside mounting holes,
one on each side of the Plate. This installation
is ideal.
Option #2: Mark the outside mounting hole on
the starboard side. Mark one of the three inner
mounting holes on the port side.
Option #3: Mark the outside mounting hole on the
port side. Mark one of the three inner mounting
holes on the starboard side.
The two center mounting holes are for
NOTICE:
additional security only and should not be used for the
primary installation of the Reinforcement Plate.
f.
With all six mounting locations marked, set aside the
Reinforcement Plate. Use a Drill with a 13/32" Drill
Bit to drill on the marked locations.
7 | minnkota.johnsonoutdoors.com
2c
Mark one
Mark one
out of two
out of two
Inboard
Inboard
Mark one
Mark one
out of two
out of two
2d
Mark one out of two
Mark one out of two
Inboard
Inboard
Mark one out of two
Mark one out of two
3e
Option #1
Option #1
Inboard
Inboard
Port
Port
3e
Option #2
Option #2
Inboard
Inboard
Port
Port
3e
Option #3
Option #3
Inboard
Inboard
Port
Port
Outboard
Outboard
Mark
Mark
Starboard
Starboard
Outboard
Outboard
Mark
Mark
Mark
Mark
Starboard
Starboard
Outboard
Outboard
Mark one
Mark one
Starboard
Starboard
Mark one
Mark one
Outboard
Outboard
Mark
Mark
©2023 Johnson Outdoors Marine Electronics, Inc.
Publicité
