A&D Medical UA-705 Manuel D'instructions page 7

Selecting the Correct Cuff Size
Using the correct cuff size is important for an accurate reading. A cuff
that is too large will produce a reading that is lower than the correct
blood pressure; a cuff that is too small will produce a reading that is
higher than the correct blood pressure. With your arm hanging at the
side of your body, measure the circumference of your upper arm at the
midpoint between the shoulder and elbow.
Arm size
9.4" - 14.2" (24-36cm)
14.2" - 17.7" (36-45cm)
NOTE: The LifeSource small cuff is not compatible with the UA-705 monitor.
Cuff Size Indicator On The Cuff
Our cuff has an indicator which tells you whether you are using the
correct cuff size or not. Place the cuff on your arm (see Page E-6 to
learn how to put the cuff on correctly) and if the Index Mark p points
within the Proper Fit Range, you are using the correct cuff size. If the
Index points outside of the Proper Fit Range, contact A&D Medical at
1-888-726-9966 (in Canada, call Auto Control Medical at 1-800-461-
0991) for more information on where to obtain a cuff replacement.
NOTE: If the cuff size indicator falls on a borderline between two size categories, pick either one
and make sure to use the same cuff size for each measurement.
Ea
All manuals and user guides at all-guides.com
Recommended
Cuff size
Medium Cuff
Large Cuff
PROPER FIT RANGE
USE SMALL CUFF
Replacement
cuff model #
UA-280
UA-281
USE LARGE CUFF
E-5