Publicité
Les langues disponibles
Les langues disponibles
WHEELS, TIRES
REMOVING THE FRONT WHEEL
REINSTALLING THE FRONT WHEEL
1
1
2
3
2
4
Place the motorcycle on a suitable stand.
Remove the two screws
1
Loosen the two screws
3
Pull the axle through the right side.
Remove the wheel from the fork.
WARNING
Do not operate the front brake lever when the front wheel is
removed.
Check if the brake disc is not dirty or contaminated with
oil or grease. If it is, clean the disc with brake cleaner.
Brake cleaner
Fit the spacer
on left side of the hub, as well as
1
right side.
Install the front wheel in the fork and install the axle
(grease the axle prior to installation).
Tighten one screw
of the right-side fork foot.
3
Fork foot screw
Install and tighten the axle nut
Front wheel axle nut
Tighten the two left-side screws
right-side screw.
Fork foot screw
Pump the front brake lever several times until the
brake pads touch the disc.
Remove the bike from the stand
and push down on the fork several times.
Tighten the right-side fork foot screws
and the nut
.
2
.
Motul
®
P2 Brake Clean
M8
20Nm
.
4
M20
60Nm
and loosen the
2
M8
20Nm
.
3
125
Publicité
