Sherco 125 SE RACING 2024 Manuel Du Propriétaire page 104

COOLING SYSTEM
FILLING THE COOLANT
2
1
104
- Remove the bleed screw
- Pour the coolant into the radiator through the
cap .
1
Coolant
Radiator bleed screw
- Continue filling.
- Fill until the coolant reaches the level (approximately
1.1 liters).
- Put the bike on the side stand and follow the rest
of the filling procedure (& p.102).
using a new gasket.
2
Motul ® Motocool
Factory Line -35°C
M6X40 8Nm