Télécharger Imprimer la page

Sherco 125 SE RACING 2024 Manuel Du Propriétaire page 102

Publicité

Les langues disponibles

Les langues disponibles

COOLING SYSTEM
SERVICING THE COOLING SYSTEM
1
2
Motorcycle horizontal
102
WARNING
- The hot liquid can cause severe injuries.
- The coolant is harmful.
- After contact with skin or eyes, or ingestion, or injuries caused
by hot liquids: Consult a physician.
- Use protective gloves.
- Do not replace the coolant with water or other not approved fluids:
it could damage your engine.
- Follow these procedures carefully and always fill the engine with
coolant when the engine is cold.
- Place the bike upright on a horizontal surface.
- Remove the cap
.
1
Approved Coolant
- Fill the radiator full so that there is no air in the
system.
- Insert the screw
.
2
Radiator
Bleed screw
Fill the coolant to the top of the radiator.
Replace the cap
and check to make sure it is tight.
1
ATTENTION
It is important to follow this procedure.
The lack of fluid, or the presence of a pocket of air left in the
radiator can cause serious damage to the engine.
Motul
®
Motocool
Factory Line -35°C
M6X8
8Nm

Publicité

loading

Ce manuel est également adapté pour:

125 se factory 2024