Publicité
Les langues disponibles
Les langues disponibles
EN
70
Centring the running belt
When you run, you may push off harder with one foot than with another. The
severity of the deflection depends on the amount of force4 that one foot
exerts in the relation to the other. This deflection can cause the belt to move
off- centre. This deflection is normal and the running belt will centre when no
body is on the running belt. If the running belt remains consistently off-centre,
you will need to centre the running belt manually.
Start the treadmill without anyone on the running belt, press FAST-key until
speed reached 6 km/h. Observe whether the running belt is toward the right
or left side of the deck.
If the running belt is toward the left side:
Turn the left adjustment screw clockwise 1/4 turn with a spanner and the right
adjustment screw counterclockwise 1/4 turn.
If the running belt is toward the right side:
Turn the right adjustment screw clockwise 1/4 turn with a spanner and the left
adjustment screw counterclockwise 1/4 turn.
•
If toward the left side of the deck, using wrench, turn the left adjustment
bolt clockwise 1/4 turn and the left adjustment bolt counter clockwise 1/4.
•
If toward the right side of the deck, turn the right adjustment bolt
clockwise 1/4 turn and the left adjustment bolt counter clockwise 1/4.
•
If the belt is still not centre, repeat the above step until the running belt is
on centre.
Publicité
