Retevis RT628 Mode D'emploi page 3

Frequency Allocation
Channel Frequency
1 446.00625
2 446.01875
3 446.03125
4 446.04375
Getting Started
Installing the AA Batteries
Your radio uses 3 AA Alkaline batteries.
1. With the back of the radio facing you, there are a
secret button to release the battery cover and remove.
2. Install 3 AA Alkaline batteries as shown on the inside
of the battery compartment.
3. Re-cover the battery cover and press down to secure.
The walkie talkie can use a NiMH rechargeable battery
instead of 3 AA Alkaline batteries.
Battery Meter
The battery icon shows the battery charge level,
from full to empty . When the battery is empty, the
radio chirps periodically after releasing
powers off when the voltage drops below a predeterm-
ined level to protect the rechargeable battery life.
Note: Remove the batteries before storing your radio
for extended periods of time. Batteries corrode
over time and may cause permanent damage to
your radio.
Turning Your Radio On and Off
After you installed batteries turn the radio on, the radio
All manuals and user guides at all-guides.com
Channel Frequency
5 446.05625
6 446.06875
7 446.08125
8 446.09375
. The radio
chirps and the display briefly shows all feature icons
available on your radio. The display then scrolls through
the available channels and Interference Eliminator
Codes. Press and hold
Setting the Volume
- Press the up button to increase the speaker volume.
- Press the down button to decrease the speaker
volume.
- The speaker volume level is indicated by the number
1-8 displayed.
Setting a Channel
1. With the radio on, press
flashes.
2. Press up or down button to set the channel.
3. Press PTT to confirm and save the channel setting.
Control Buttons
Use / to:
• Turn radio on/off
• Scan
Use UP/DOWN to:
• Adjust volume
• Scroll through menus
Use ♪/MON to:
• Transmit call tone
Use to:
MENU
• Select menu options
• Exit the menu (when pressed while in a menu)
2
button turn the radio off.
, the current channel
MENU