Publicité
Les langues disponibles
Les langues disponibles
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of these devices can reduce dust
related hazards.
h) Do not let the confidence gained from the frequent use of tools make you ignore general
safety principles. Careless action can cause a serious injury in a fraction of a second.
3.4 USE OF POWER TOOL
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired
c) Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store power tools out of the reach of children and do not allow people unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
e) Look after your power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools operation. If
damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could result in a hazardous situation.
h) Keep the handles and surfaces free dry, clean and grip of oil and grease. Slippery handles
and gripping surfaces do not allow secure grip and control of the tool in unforeseen situations.
3.5 SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
3.6 ELECTRICAL SAFETY (BATTERY 81100)
Never handle or remove the battery from the device.
Charge the battery only with the charger 104519 supplied by ENAR.
Make a full charge of the battery before using it.
Do not overcharge the battery. Once the LED indicator on the charger changes its status to
GREEN, unplug the connector from the charger and then, disconnect the charger from the mains.
Never subject the equipment to impacts.
Never open the battery, neither manipulate the connections.
Do not expose batteries to sources of heat or fire.
Operation temperature of the battery is between -10ºC and 45ºC.
BATTERY POWERED ELECTRONIC CONVERTER
SPYDER E-BATT
en
7
Publicité
