Kicker KS Serie Manuel D'utilisation page 8

Crossover & Wiring Configuration
We recommend using 16 gauge (or larger) wire. The
KS Speakers are rated at 4 ohms and work with
any source unit or amplifier designed to operate at
a 4 ohm load. Make sure your source unit or
amplifier is rated for 4 ohm operation.
Use the tweeter attenuation switch to adjust the
output level of the tweeter to 0 dB, +4.5 dB, or
+9 dB. Higher switch settings will result in more volume
from the tweeter.
Crossover Wiring
One component set per channel
At least two amplifier channels are needed for stereo
operation (only one channel is shown)
amp
Pro Tip: You're a KICKER KX amplifier and a
few cables away from a full system upgrade that
will dominate any factory system! KICKER line of
amplifiers make it easy to upgrade to solid bass with
your existing or stock source unit. Also, ask your
dealer about KICKER Subwoofer upgrades.
English
+
-
crossover
+
-
+
-
8