EINHELL Bavaria BAS 18 S Mode D'emploi page 5

Anleitung BAS 18 S SPK 1
On/Off switch (4)
Infinitely variable speed control is possible with the
On/Off switch. The further you press the switch, the
higher the speed of the battery-powered
drill/screwdriver.
Selecting drill or hammer mode (7)
For normal drilling, turn the front set-collar to the
"drill" symbol. For drilling with hammer action, turn
the front set-collar to the "hammer" symbol and the
set-collar for torque adjustment to the "drill" symbol.
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size. Set the torque, as
described elsewhere in these operating instructions,
to suit the size of screw.
Technical data
Voltage supply
Speed 0-550 rpm
Torque
Forward and reverse rotation
Chuck diameter
Battery charging voltage
Battery charging current
Mains voltage for charger 230 V ~ 50 Hz
Sound pressure level LPA: 69,9 dB(A)
Sound power level LWA: 80,9 dB(A)
–
Vibration
a
w
Weight
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
21.12.2005 7:50 Uhr Seite 5
All manuals and user guides at all-guides.com
18 V =
17 levels
yes
1 - 10 mm
18 V =
2,5 A
< 2,5 m/s 2
1,6 kg
GB
5