Publicité
Les langues disponibles
Les langues disponibles
g) Automatic Operation
• Push the button FUNC (5) until "ShNd" is displayed and push the button ENTER (8).
• Select the desired automatic effect "SP01" to "SP06" with the arrows.
• Push the ENTER button (8) to confirm your selection.
All automatic effects (1-5) are switched in sequence in the setting "SP01".
h) Display Alignment
• Push the button FUNC (5) until "dISP" or "dSIP" is displayed.
• Press the button ENTER (8) twice to change the display alignment.
dISP
normal display alignment
dSIP
Display alignment turned by 180°
12. Handling
• Never connect the mains plug to a mains socket immediately after the device has been taken from a cold
to a warm environment. The resulting condensation may destroy the device. Allow the device to reach
room temperature before connecting it. Wait until the condensation has evaporated.
• Never plug in or unplug the mains plug when your hands are wet.
• Never pull the mains plug from the mains socket by the cable. Only pull it from the mains socket by the
intended grip areas.
• Unplug the mains plug from the mains socket if you are not using the device for an extended period of
time.
• Disconnect the mains plug from the mains socket during thunderstorms for reasons of safety.
• Do not cover the device to ensure sufficient ventilation. Air circulation also must not be impaired by any
objects like magazines, tablecloths, curtains, etc. During operation, keep a minimum distance of 0.5 m
around the device.
34
Publicité
