Renkforce DL-1115 Mode D'emploi page 29

11. Operation
a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Ad-
ditionally, it can be used as a master device with integrated controller to control other connected effect
lights synchronously in master-slave operation, or as slave device via the controller of another effect light.
The operating modes are set in the menu via the display (3) and the function buttons FUNC (5), DOWN (6),
UP (7) and ENTER (8).
• Press FUNC (5) repeatedly to select the desired function.
• Push the ENTER button (8) to confirm your selection.
• Select the desired option with the UP (7) and DOWN (6) buttons.
• Push the ENTER button (8) to confirm your selection.
The installed controller needs a few seconds to accept and implement the settings.
29