Télécharger Imprimer la page

Renkforce DL-1115 Mode D'emploi page 23

Projecteur à effets à led

Publicité

Les langues disponibles

Les langues disponibles

5. Safety Notes
In case of damage caused by non-compliance with these operating instructions, the warranty/
guarantee will expire. We do not assume any liability for consequential damage!
We do not assume any liability for property damage and personal injury caused by improper
use or non-compliance with the safety instructions. In such cases the guarantee/warranty will
expire!
Dear Customer: the following safety information is intended not only for the protection of the
device but also for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not
permitted.
• This device is a protection class I product. The only permissible voltage source is a properly
grounded mains socket (100-240 V/50/60 Hz) of the public mains.
• The mains socket must be close to the device and easily accessible.
• Anyone operating, installing, setting up, commissioning or servicing this effect beamer must be
trained and qualified properly and observe these operating instructions.
• Never look straight into the light source during operation. The bright light flashes may tem-
porarily impair your eyesight. Apart from this, epileptic fits may be triggered under certain
circumstances in persons sensitive to such lights. This particularly applies to epileptics.
• LED radiation may be dangerous if the LED beam or a reflection enters the unprotected eye.
Therefore, familiarise yourself with the statutory regulations and measures of precaution for
the operation of this kind of LED device before using the device.
• Never touch the mains plug with wet or damp hands. There is a risk of potentially fatal electric
shock!
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
on all poles (e.g. via the respective circuit breaker and FI switch) and then carefully pull the
mains plug from the mains socket. Separate the mains cable from the device and replace it.
Never use the product if the mains cable is damaged.
• When mounting the product, make sure that the power cord is neither jammed nor damaged by
sharp edges.
• This product is not a toy and not suitable for children. Children cannot judge the dangers in-
volved when handling electrical devices.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device
or in its vicinity. Liquids may get into the housing and impair electrical safety. This also poses
great danger of fire or potentially fatal electric shock! If this is the case, first power down the
respective mains socket on all poles (e.g. switch off circuit breaker and FI switch) and then pull
the mains cable from the socket. Do not operate the product anymore afterwards, but take it to
a specialist workshop.
• Do not expose the device to any high temperatures, dripping or splashing water, strong vibra-
tions or heavy mechanical stress.
• Do not place any open sources of fire, such as burning candles, on or directly next to the de-
vice.
• Consult an expert if you are unsure as to the function, safety or connection of the product.
23

Publicité

loading

Ce manuel est également adapté pour:

1413291