Password; Formatting The Memory Card; Default Factory Settings; Language Selection - Minox DTC 450 SLIM Mode D'emploi

When you have made all settings, press the OK button
(11) to save your settings. Press the menu button (13) to
return to the main menu without changing the settings.
Note: Activate the moon phase calendar by entering
precise information. The image of the moon phase will
appear on every picture or video clip.

Password

This function allows you to enter a 5-digit number com-
bination to safeguard your DTC 450 against possible mis-
use. You will not be able to access the "Setup mode"
(SETUP = setup mode, main switch (12) in top position)
for the camera without entering the number combination.
In the main menu, select the menu option "Password"
and press the OK button (11). This will take you to the
input field. Enter the desired number combination from
the numbers 0 to 9 in each field using the arrow keys
(up/down) (11); use the arrow keys (left/right) (11) to
access the individual fields of the number combination.
Alternatively, you can also confirm each number after
entering with OK (11) to move to the next field. Once you
have entered the complete number combination, press
the OK button (11) to save it. The last entry field of the
number combination must be selected in order to save.
Press the menu button (13) to return to the main menu
without assigning a password.
Note: Password protection is not activated if you
assign five zeros (00000) in the input field and press OK
(11). To deactivate a password assigned by you, change
this therefore to "00000" and confirm with OK (11).
46

Formatting the memory card

Formatting the memory card will delete all data on the
memory card and will prepare the memory card for use
in the camera. In the main menu, select the menu option
"Format SD card" and press the OK button (11). This will
take you to the submenu. Select "Yes" if you would like
to format the memory card and confirm with OK (11) to
carry out the formatting. If you select "No" and confirm
with OK (11), the memory card will not be formatted. In
both cases you will return to the main menu. By pressing
the menu button (13) you will be returned to the main
menu without having to make a selection. No formatting
of the SD card will be undertaken.

Default factory settings

With this menu option, you can restore your DTC 450
settings to factory settings. In the main menu, select
the menu option "Default settings" and press the OK
button (11). You can select "Yes" or "No" using the up/
down arrow keys (11) and confirm with OK (11). Select
"No" to retain the existing settings and the camera will
return to the main menu. If you choose "Yes" and con-
firm with OK (11), your DTC 450 will be restored to the
factory settings and revert to the main menu. By pressing
the menu button (13) you will be returned to the main
menu without having to make a selection. The camera
will retain the current settings.

Language selection

To change the language setting of your DTC 450, please
follow these steps:
47