Imperial DABMAN i450 CD Manuel D'utilisation page 143

7. SETTINGS
The network function via a LAN cable is activated when the de-
vice is started from standby mode.
E
If you plug in the network cable when the device is on, switch it off
using the power button on the radio or the power button on the
remote control and then on again.
7.1.3.2. Wireless network settings
If you want to integrate your radio via WIFI into a WIFI network,
you can switch the WIFI function on or off in this menu. If the WIFI
function is activated, you can make all further settings here to inte-
grate the radio into a wireless network.
Use the ▼▲ buttons on the remote control to select WIFI network
settings and press the ENTER button on the remote or confirm by
using ENTER on the device.
Activate or deactivate a network connection via WIFI by selecting
the corresponding menu item.
Confirm the selection with the ENTER button on the remote con-
trol or by pushing the ENTER button on the device.
Once the wireless network is activated, the device scans all WIFI
networks within range and displays them in a list.
Use the remote control's ▼▲ buttons to select the network you
would like to connect to.
Enter the WIFI password. Use the ▼▲ buttons to choose a char-
acter, the ► button lets you jump further.
143 DABMAN i450CD