Publicité
Les langues disponibles
Les langues disponibles
EN
2. Feed the cables through the key hole bushing of the heat exchanger unit.
1.
2.
3. Insert the spacers into the screw holes from the upper side of the heat exchanger unit.
4.
NOTICE! Damage hazard
Ensure that no cable is pressed in or pinched.
Align the heat exchanger unit to the roof top unit.
5. Fasten the heat exchanger unit though the ceiling to the roof top unit with the 12 bolts supplied with the fixing
kit. Tighten the bolts using a torque spanner and a fastening torque of max. 1.2 Nm.
14
1.
2.
1,2
W
Publicité
