Télécharger Imprimer la page

ZANKER ZKI1415 Notice D'utilisation page 25

Publicité

Les langues disponibles

Les langues disponibles

3.
Press the start/cancel button. The washing pro-
gramme starts automatically.
– The start/cancel indicator light comes on.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point
of interruption.
How to cancel a washing programme
If a washing programme has not started, you can
change the selection.
When a washing programme is in progress, it is not
possible to change the selection. It is necessary to can-
cel the washing programme to make a new selection.
How to cancel a washing programme
1.
Press and hold the start/cancel button until the
start/cancel indicator light goes off.
2.
Make sure that there is detergent in the detergent
dispenser before you start a new washing pro-
gramme.
Care and cleaning
To remove and clean the filters
Dirty filters decrease the washing results.
1
All manuals and user guides at all-guides.com
2
Clean the filters below
running water.
At the end of the washing programme
• The appliance stops automatically.
• The end-of-programme indicator light is on.
1.
Switch off the appliance.
2.
Open the appliance door.
3.
For better drying results, keep the door ajar for
some minutes.
Remove the items from the baskets
• Let the dishes become cold before you remove them
from the appliance. Hot dishes can be easily dam-
aged.
• First remove the items from the lower basket, then
from the upper basket.
• There can be water on the sides and on the door of
the appliance. Stainless steel becomes cool more
quickly than the dishes.
3
To remove filters B and
C, turn the handle ap-
proximately 1/4 counter-
clockwise .
4
Remove the flat filter A
from the bottom of the
appliance.
25

Publicité

loading