Publicité
Les langues disponibles
Les langues disponibles
German degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and
electronically.
Manual adjustment
1
Electronic adjustment
1.
Press and hold the start/cancel button.
All manuals and user guides at all-guides.com
Water hardness
French degrees
(TH°)
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
2
Turn the water hardness
dial to the position 1 or 2
(refer to the table).
mmol/l
Clarke de-
grees
9,1 - 12,5
64 - 88
7,6 - 9,0
53 - 63
6,5 - 7,5
46 - 52
5,1 - 6,4
36 - 45
4,0 - 5,0
28 - 35
3,3 - 3,9
23 - 27
2,6 - 3,2
18 - 22
1,9 - 2,5
13 - 17
0,7 - 1,8
5 - 12
< 0,7
< 5
2.
Turn the programme knob clockwise until the pro-
gramme marker agrees with the first available
washing programme on the control panel.
3.
Release the start/cancel button when the on/off
and the start/cancel indicator lights start to flash.
4.
At the same time, the end-of-programme indicator
light starts to flash. The number of flashes shows
the current adjustment.
Example: 5 flashes / pause / 5 flashes = level 5.
5.
Press the start/cancel button to change the adjust-
ment. Each time you press the start/cancel button,
the adjustment goes to the subsequent level.
6.
Switch off the appliance to keep the operation.
If the water softener is set electronically to the lev-
el 1, the salt indicator light stays off.
Water hardness adjust-
ment
manually
elec-
tronical-
ly
10
1)
2
9
1)
2
1)
8
2
1)
7
2
6
1)
2
1)
1)
2
5
1
4
1
3
1
2
2)
2)
1
1
21
Publicité
