Napoleon Ascent Multi-View BHD4PNA Manuel D'installation Et D'opération page 44

finishing
EN
11.9 non-combustible facing material
WARNING
!
Non-combustible facing material must not project more than 4" (101.6mm) from the face of the door (all four
sides). If greater projections are desired, increase the clearance to the sides, bottom and top by 2" (50.8mm) for
every additional 1" (25.4mm) of projection. If using an optional surround, the same rule applies, starting from the
top of the surround. Ensure clearances are maintained for surround removal, as it must lift off the appliance for
maintenance.
A
A
4"
(101.6mm)
2" (50.8mm)
Optional
surround
44
W415-4020 / 08.09.21
WARNING
!
Non-combustible facing material must not project more than 4" (101.6mm) from the face of the doo
sides). If greater projections are desired, increase the clearance to the sides, bottom and top by 2
every additional 1" (25.4mm) of projection. If using an optional surround, the same rule applies, star
top of the surround. Ensure clearances are maintained for surround removal, as it must lift off the a
maintenance.
A
A
4"
(101.6mm)
6" (152.4mm)
2" (50.8mm)
5" (127mm)
4" (101.6mm)
Top of
appliance
Door
Optional
surround
Section A - A
B
B
6" (152.4mm)
5" (127mm)
3"(76.2mm) 4" (101.6mm)
2" (50.8mm)
Top of
0" (0mm)
appliance
Door
Section A - A
B
B
3"(76.2mm)
6" (152.4mm)
2" (50.8mm)
5" (127mm)
0" (0mm)
4" (101.6mm)
Top of
appliance
Door
Section B - B
44.4
6" (1
5" (1
4" (1
Section B - B
44.4