Publicité
Les langues disponibles
Les langues disponibles
Replacing a lam p
If the screen becomes dark, the color looks unusual, or
the LAMP indicator on the front of the monitor flashes,
it is time to replace the lamp with a new one.
Disposal of t he Used Lam p
Sony regards protection of the environment as
extremely important.
Kindly put the used lamp in the new lamp's package
and send it to the sales company whose address
appears on the new lamp's guaranty card.
Bef ore replacem ent
• Be sure to use a Sony XL-100 series lamp unit (not supplied)
for replacement. Use of other lamps may damage the monitor.
• Do not remove the lamp for any purpose other than
replacement.
• When replacing the lamp, let it cool down completely as the
surface of the lamp remains extremely hot for at least 30
minutes after the power has been turned off.
• Do not leave the removed lamp near flammable materials.
• Do not pour water onto the removed lamp, nor put any object
inside the lamp.
• Do not put inflammable materials and metal objects inside the
lamp receptacle on the monitor, after removing the lamp. Do
not touch the receptacle.
• Fit the new lamp securely, otherwise the screen may become
dark, or it may cause a fire.
1
Turn of f t he pow er sw it ch on t he m onit or
and unplug t he pow er cord.
Wait at least 30 minutes to allow the lamp to cool
down before replacing it .
2
Rem ove t he f ront panel.
Hold the monitor tightly.
28
-GB
Addit ional Inf orm at ion
Downloaded from:
https://www.usersmanualguide.com/
Grasping the right end of the
front panel w ith your fingers, pull
the panel tow ards you. Repeat
this step w ith the left end of the
panel. Be careful not to catch
your fingernails.
3
Loosen t he screw w it h a coin or sim ilar
object t o rem ove t he lam p cover.
4
Loosen t he t w o screw s t hat secure t he
lam p, t hen pull out t he lam p.
The lamp is very hot immediately after use. Never
touch the front glass of the lamp or the
surrounding parts.
Loosen the tw o screw s w ith the hexagon
head w rench (supplied w ith the lamp).
Hold the handle and pull out straight
tow ards you.
Place the removed lamp into the empty box of the
replacement lamp.
5
M ount t he new lam p and t ight en t he t w o
screw s securely using t he hexagon head
w rench.
6
M ount t he lam p cover and t ight en t he
screw .
7
M ount t he f ront panel.
Be careful not to damage the monitor's speakers.
Not es
• Do not touch the front glass of a new lamp or the glass of the
lamp receptacle. This may reduce picture quality or lamp life.
• Be sure to attach the lamp securely; otherwise, the monitor will
not turn on.
• A loud sound may be heard when the lamp burns out. This is
not dangerous.
• Consult your Sony dealer for obtaining the following lamp
units:
XL-100 (for Japan)
XL-100U (for the U.S.)
XL-100E (for Europe)
XL-100M (for all other areas)
Publicité
