Sony KL-X9200J Mode D'emploi page 17

The CENTER adjustment screen automatically
disappears after about 80 seconds if you do not press
any button. You can also erase the CENTER adjustment
screen by pressing MENU.
To reset t o t he f act ory preset set t ing
Press RESET on the monitor while the CENTER
adjustment screen is displayed. For details, see page 26 .
Not es
• You cannot use this function for the input from VIDEO 1/2/3
IN and COMPONENT IN.
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
Adjust ing t he pict ure size (SIZE)
After projecting the picture from a computer, you may
need to adjust the picture size to fit the monitor screen.
The setting is only for the input signal displayed on the
screen.
1
Press M ENU.
2
Press v or V t o select "
ENTER.
Downloaded from: https://www.usersmanualguide.com/
MENU ENTER
MENU
(SIZE)," and press
S I Z E
ENTER
3
Press B or b t o adjust t he pict ure size.
The SIZE adjustment screen automatically disappears
after about 80 seconds if you do not press any button.
You can also erase the SIZE adjustment screen by
pressing MENU again.
To reset t o t he f act ory preset set t ing
Press RESET on the monitor while the SIZE adjustment
screen is displayed. For details, see page 26 .
Not es
• If a signal with resolution of 640 × 350, 640 × 400 or 720 × 400,
or Wide Resolution signal is input, the picture will be enlarged
to fill the screen but will appear lengthened vertically.
• You cannot use this function for the input from VIDEO 1/2/3
IN and COMPONENT IN.
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
EX I T
b : to increase horizontal size
B : to decrease horizontal size
Operat ions
GB
17
-GB