Network Connection; Scope Of Delivery; Accessories - Festo 8129208 Notice D'utilisation

Single-Phase Energy Measurement Box – Operating Instructions

9.3 Network connection

1. Insert network cable into the connector socket "LAN".
2. If necessary, connect the network cable with the Ethernet interface of a PC via a switch.
The interface must have an IP address in the same sub-network, e.g. 172.21.0.91

10 Scope of delivery

Quantity Order no.
1 8129208
1 8130877
3 8027739
1 8027279
2 153367
3 153032

11 Accessories

Network connection cable with plug in accordance with
Plug type
CEE 7/VII
NEMA 5-15
BS1363
AS 3112-1981
SEV 1011
SANS 162-1
Subject to change
Multi-socket strip with 3x CEE 7/VII terminal sockets as well as IEC connection plug
Order number: 8072997
30
Designation
Single-phase energy measurement box
Operating instructions
Non-heating appliance extension cables, order number
Network cable
Push-in T-connector 6 mm
Straight plug connector 6 mm
Countries (code)
DE, FR, NO, SE, FI, Pt, ES, AT, NL, BE, GR, TR, IT, DK, IR, ID
US, CA, BR, CO, EC, KR, TW, TH, PH, JP
GB, IE, MY, SG, UA, HK, AE
AU, NZ, CN, AR
CH
ZA, IN, PT, SG, HK, (GB), (AE)
Network cables are not allowed to be replaced by inadequately measured network
cables.
Cable type must correspond to H05VV-F3G1.0mm² or SJT3x18AWG.
Maximum length 2.5m
Order numbers
247661
350362
350363
350364
350366
350367
WARNING
© Festo Didactic 8130877