Publicité
Les langues disponibles
Les langues disponibles
EN
26
•
Extend the angle bars to the desired height and fasten them with 16 M5
bolts and nuts.
•
Important: The overlap length must be at least 100 mm.
•
If your exhaust hood is to be used in exhaust air mode, guide the exhaust
air hose through the round recess in the suspension plate and direct it into
the exhaust air pipe.
•
Fasten the inner part of the chimney to the suspension plate using 4 M4
fastening screws.
•
Slide the outer part of the chimney onto the inner part. Use the S-shaped
hook to hold the chimney for further assembly.
•
Lift the exhaust hood with at least 2 people and fasten it to the angle bars
with 8 M5 screws.
•
If present, pull down the exhaust hose and connect it to the air outlet of the
exhaust hood. Make sure that the connection is tight.
Publicité
