Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Notes:
(1) The neutral of the appliance is not connected to the earth whatever the
function mode is. If requested and according to the local regulation, an automatic
connection between Neutral and earth in inverter mode only may be done by
installing a bridge internally to the unit. Please contact your installer regarding this
point.
(2) Remote control for remote adjustment of the input limit. (see chap. 4.6.3)
2.2
Description of the main functions
2.2.1 The inverter
The sine wave inverter COMPACT generates a sinusoidal AC voltage with an
exceptionally precise voltage and stabilized frequency. In order to start large electric
motors, the user has the possibility to use a short surge power which is 3 times the
nominal power of the COMPACT.
The inverter is protected against overload and short circuit. A power stage with the
latest MOS-FET power transistors, a toroidal transformer, and a fast regulating
system makes a robust and reliable inverter with the highest efficiency. A 1-20 Watt
adjustable charge detection system allows the smallest energy consumption and
ensures a long life for the battery.
2.2.2 The transfer system
COMPACT can be connected to an AC source. For example a stand-by emergency
generator or the AC network. With the transfer system, on one side you have an
alternating voltage at the output for the use of consumer appliances. On the other
side the battery park is being charged. The distribution of energy between the
consumer appliances and battery charger is automatic.
2.2.3 The battery charger
The built-in battery charger is so designed that it can charge the battery quickly and
fully. A microprocessor controlled, Step charging process, ensures the optimal
charging of the battery. The desired charging current can be set continuously from 0
to 50/55 A, as per the model. The setting is made accordingly to the battery capacity
and power available.
The battery charger is designed for lead-acid and lead-gel batteries. Thanks to the
floating charge system the batteries can remain continuously connected.
2.2.4 The solar charge controller (optional)
With the built-in solar charge controller, the COMPACT is a complete solar-power-
center. In a solar installation this controller ensures that the batteries are charged
correctly. With the COMPACT, batteries can be charged with a generator and with
the solar modules at the same time. The charging of batteries with both energy
sources is carried out fully automatically.
2.2.5 Remote control
As an option, a remote control RCC-01 can be connected to COMPACT. All
operating features and displays, save the adjustment levels (22/23/24/26), are
available on the re-mote control. It is supplied with a 20m long cable. This cable can
be up to 40m long. On the remote control, output power and charging current are
also displayed.
COMPACT V6.7.1
8/83
Publicité
Table des Matières
