Table des Matières
Publicité
Liens rapides
Publicité
Table des Matières
Manuels Connexes pour Studer next 3
Sommaire des Matières pour Studer next 3
- Page 1 3 swiss made power...
- Page 2 Werk in der Schweiz entwickelt, hergestellt, montiert und getestet. Es hat eine 6-jährige Garantie und kann im Rahmen des studercare+ Programms um 6 + 6 verlängert werden (noch nicht verfügbar, wenden Sie sich an Ihren studer- Partner, um weitere Informationen zu erhalten).
-
Page 3: General Information
Studer disclaims all responsibility and liability for damage, costs or losses resulting from an installation that does not comply with the instructions, a faulty operation or inadequate maintenance. The use of studer equipment is in any case under the responsibility of the customer. -
Page 4: Mounting And Installation
Mounting and installation Storage and content Fixing and dimensions 60°C -20°C 180mm min. 250mm min. 550mm min. 120mm Mounting place min. 150mm The batteries should only be installed by qualified personnel. min. min. 290mm 350mm 58 kg 454mm 352mm... -
Page 5: Battery Connection
• The solar generator must be class II insulated CAN BMS Communication • Up to 5 x 25mm cable, 1.6Nm Communication with Lithium studer nx communication bus CANH studer Protection device AC to protect cables, batteries 2x RJ45 black at cable: nx CANL... - Page 6 PV production of 2x – input limit MPPT input Solar excess 6.45 Yesterday Today 1x – night Next 3/5 Max. power PV input 1/2 3x – check phase rotation on – AC flex (source) Voltage Sun today Total Energy Saved Fuel 15.2...
- Page 7 Configuring the next Multi units nx interface 3 phase and parallel combination User menu Dashboard/synoptic Configuration assist Dashboard Display real information Guided configuration (not screen during Synoptic Configuration start) Graphs Notification center Remote setup Update Configuration assistant Advanced (Not yet available) (Not yet available) Up to 3 units in parallel Multi-unit and multi-battery...
-
Page 8: Technical Data
Technical data Maintenance and recycling IP 30 Maintenance and recycling Protection Class I Except for the periodic check of the connections (tightening, general inverter condition), the next does not require any particular maintenance. To nx3 16000-48 st nx3 16000-48 s nx3 16000-48 t nx3 16000-48 dispose of this product, please use the service for the collection of Continuous Power... - Page 9 Serial Number : Installed by : Date : Signature : Call our specialists +41 27 205 60 80 or visit studer-innotec.com/support Studer Innotec SA rue des Casernes 57 1950 Sion, Switzerland info@studer-innotec.com 4O92 © All rights reserved Studer Innnotec SA – V1.1...