Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
What to do if...
The appliance does not start or stops during operation.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solu-
tion to the problem yourself, contact your dealer or the After Sales Service.
Problem
• Continuous flash
of the light of the
running
pro-
gramme.
• Intermittent audi-
ble signal.
• 1 flash of the end
indicator light.
Malfunction:
The
dishwasher
does not fill with wa-
ter.
• Continuous flash
of the light of the
running
pro-
gramme.
• Intermittent audi-
ble signal.
• 2 flashes of the
end
indicator
light.
Malfunction:
The dishwasher will
not drain.
• Continuous flash
of the light of the
running
pro-
gramme.
• Intermittent audi-
ble signal.
• 3 flashes of the
end
indicator
light.
Malfunction:
The anti-flood de-
vice operates.
Malfunction:
The
programme
does not start.
Possible cause
The water tap is blocked or furred
with limescale.
The water tap is closed.
The filter in the water inlet hose is
blocked.
The connection of the water inlet
hose is not correct. The hose can
be kinked or squashed.
There is a blockage in the sink spi-
got.
The connection of the water drain
hose is not correct. The hose can
be kinked or squashed.
Close the water tap and Contact your local After Sales Service.
The appliance door is not closed.
Mains plug is not connected in.
Solution
Clean the water tap.
Open the water tap.
Clean the filter.
Make sure that the connection is
correct.
Clean the sink spigot.
Make sure that the connection is
correct.
Close the door.
Put in the mains.
17
Publicité
