Publicité
Les langues disponibles
Les langues disponibles
Step 3
Pull the rear end of the shelf sup‐
port away from the side wall and
remove it.
Step 4
Install the shelf supports in the op‐
posite sequence.
12.3 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
Turn off the oven and wait
until it is cold.
Step 1
C1 - Light cleaning
Step 2
Step 3
Step 4
During the cleaning the oven lamp is off.
When the oven is at the set temperature, the door locks. Until the door unlocks the display shows:
Turn off the oven and wait
until it is cold.
22
ENGLISH
Before the Pyrolytic Cleaning:
Remove all accessories.
Pyrolytic Cleaning
Option
- press to select the cleaning programme.
- press to start the cleaning.
After cleaning, turn the knob for the heating functions to the off position.
When the cleaning ends:
Clean the cavity with a soft cloth.
1
CAUTION!
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Clean the oven floor and the inner
door glass with warm water, a soft
cloth and a mild detergent.
Enter menu: Cleaning
Duration
Remove the residue from the bottom
2
.
2 h
.
of the cavity.
Publicité
