Gallagher M35 Notice D'installation page 12

5-Step Installation Guide
Step 4. Connect the fence
Connect the energizer's red (FENCE) terminal to the fence using double insulated
cable. Remove 5cm (2") of plastic coating from one end of the cable. Bend the end
of the wire to form a loop. Unscrew the red (FENCE) terminal and insert the loop of
wire between the washers. Screw the terminal closed, ensuring the wire is firmly
clamped. Attach the other end of the cable to the fence using a joint clamp.
Step 5. Plug the energizer into a power outlet
Check that the light on the front of the energizer is flashing.
12
Gallagher 3E1802 Small Mains Energizer User Manual
Green
To earth
Red
To fence
Light