JVC TK-C1460 Manuel D'instructions page 43

Specifications (Continued)
Image pickup device:
Synchronization method :
Scanning frequency:
Resolution:
VIDEO OUT:
Y/C OUT:
Video S/N ratio:
Minimum required illumination:
Communication:
Lens mount:
Power supply and power consumption:
Ambient temperature:
Mass:
Accessory:
Design and specifications are subject to change without notice.
All manuals and user guides at all-guides.com
TK-C1460U
1/3 type IT CCD, 768 (H) × 494 (V)
TK-C1460E
1/2 type IT CCD, 752 (H) × 582 (V)
Internal, Line lock, Full Genlock
TK-C1460U
(H) 15.734 kHz, (V) 59.94 Hz
TK-C1460E
(H) 15.625 kHz, (V) 50 Hz
480 TV lines (H)
Composite video signal 1 V (p-p), 75Ω (BNC)
TK-C1460U (4-pin)
Y: 0.714V(p–p), 75Ω
C: 0.286V(p–p), 75Ω
TK-C1460E (4-pin)
Y: 0.7V(p–p), 75Ω
C: 0.3V(p–p), 75Ω
50 dB (AGC OFF)
0.8 lx (50%, F1.2, AGC 20 dB)
0.4 lx (25%, F1.2, AGC 20 dB)
0.03 lx (50%, F1.2, AGC 20 dB, B&W MODE)
0.025 lx (50%, F1.2, AGC 20 dB, SENSE UP × 32)
RS-422A or RS-485 (switchable)
9600 bit/s
C/CS mount
TK-C1460U
AC24V `, 60 Hz, DC12V — --- 6.5W
TK-C1460E
AC 24 V ` 50 Hz/60 Hz, DC 12 V — --- 650 mA
–10°C to 50°C (operation)
0°C to 40°C (recommended)
640 ˝
TK-C1460U
Instructions ......................... 1 Ferrite core ................ 1
4P plug ............................... 1 Warranty card ............ 1
Service Information card ......... 1
TK-C1460E
Instructions ......................... 2 Ferrite core ................ 1
4P plug ............................... 1
E-43