PNI SAFE HOUSE PG600 Manuel Utilisateur page 9

Install the motion sensor
To avoid false alarms, consider the following before installing the sensor:
• Do not position the sensor facing the windows or doors.
• Do not position the sensor facing moving objects
• Do not position the sensor near the source of cold or hot air
• Do not install 2 or more sensors in the same area, as this may cause interference
• If the LED blinks, the battery is discharged. Replace the battery.
• The maximum detection distance is 8 meters and the maximum transmission
distance is 80 meters. The presence of obstacles reduces this distance. Carefully
choose the location of the sensor installation.
Notes:
• If the central unit's LED flashes permanently, it means that it is not connected to WiFi
• Arm: sound and light alarm
• Home arm: only light alarm
• Disarm: SOS alarm is available
• Remote controls supported: maximum 8
• Sensors supported: maximum 24
• Adjustable beep duration: from 1 to 180 seconds
• Accessories frequency: 433MHz
9