Publicité
Les langues disponibles
Les langues disponibles
Connect to WiFi
1.
Connecting to the WiFi network. Method # 1
•
Open the application, press "+" in the upper right corner to add devices → select
"Security & Sensor" → "Alarm Wi-Fi".
•
Power the central unit (the siren) and turn it on by moving the button to the ON
position. Using a sharp object, reset the device. The red area of the device blinks to
indicate that it is in pairing mode.
•
Confirm in the application if the device is blinking.
•
From the next interface, select the WiFi network to which you want to connect the
device and enter the password
•
Wait for the device to connect.
•
The newly added device will appear in the main interface of the application
3
Publicité
