AKG SPC 4 Mode D'emploi page 17

1. Disconnect the unit from power.
2. To clean the receiver surfaces, use a soft cloth moistened (not soaked!) with water.
• Never use any caustic or scouring cleaners or cleaning agents containing al-
cohol or solvents since these may damage the enamel and plastic parts.
Type:
Carrier range:
System gain:
RF inputs:
RF outputs:
Power requirement:
Power supply (for SST 4s):
Dimensions:
Weight:
This product conforms to the standards listed in the Declaration of Conformity. To
order a free copy of the Declaration of Conformity, visit http://www.akg.com or con-
tact sales@akg.com.
SPC 4
All manuals and user guides at all-guides.com
6 Specifications
4 to 1 antenna combiner
500 MHz to 865 MHz
0 dB
4 BNC sockets, 50 ohms
1 BNC socket, 50 ohms
12 VDC/900 mA
12 VDC/2 A
200 x 190 x 44 mm (7.8 x 7.5 x 1.7 in.)
1,193 g (2.63 lbs)
5 Cleaning
L
Important!
17