Conrad Electronic 75 10 74 Mode D'emploi page 76

All manuals and user guides at all-guides.com
The following parameters are set at the factory:
Parameter
8900
401
501
601
70
800
811
820
821
831
90
Programming example
This chapter contains a programming example for your code lock.
Please note that this is only one of many ways that you can program
your system.
☞
We recommend that you replace the sample codes
used here with your own codes. Use the example for
guidance and enter your personal code into the tables
in the table at the end. Store it in a safe place to prevent
anyone from using your personal codes.
Explanation
Single user mode
Output 1 switches for 1 second
Output 2 switches for 1 second
Output 3 switches for 1 second
After 10 wrong code entries the keypad is disabled
for 30 seconds
Door activity alarm is deactivated
Opening sound is deactivated
User code entry must be confirmed with the # key
(only when switched to multi-user mode)
User code can be entered without using the # key
(as delivered or when in single user mode)
Key tones are activated
Door delay alarm is deactivated
63