Conrad Electronic 75 10 74 Mode D'emploi page 63

All manuals and user guides at all-guides.com
Connection example 1
Door lock with access control
To avoid electrostatic discharge, always connect contact „(-) GND"
of the connector strip 2 to a ground contact.
The „DOOR" LED illuminates when the door opener is operated.
The connection of contact „O/P 3" (output 3) and „O/P 1. INHIB"
(access control) can be optionally used. User code 3 can deactivate
the switching feature of the code lock (e.g. at night, outside normal
office hours). Programming is carried out in mode „61". When the
function is active, the green"AUX" LED illuminates.
When access control is activated, make sure that
no-one is in any of the locked rooms or buildings,
because all switching functions are disabled for the
period that access control is activated.
52