Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Load capacity of outputs:
Output 1
Output 2
Sabotage contact
EG IN
DOOR BELL
O/P 1. INHIB.
„Input control"
OUTPUT 1
INT. LOCK
Output control for
Two-door system
KEY ACT
Key-Alarm
DU OUT
coercion contact
„DURESS"
„EGRESS contact", if this terminal is connected to the ground poten-
tial then OUTPUT 1 switches according to your programming.
This contact is useful when you wish to open a door from the inside
that is controlled by OUTPUT 1.
☞
In alarm systems there are two types of contact,
designated with „NO" and „NC".
N.O. (Normally Open): When standby the contact is
open
N.C. (Normally Close): When standby the contact is
closed
48
5 A / 30 V AC/DC
1 A / 30 V AC/DC
Current-free NC contact for a 24 h alarm
loop
NPN open-collector contact, 100 mA /
24 V DC. Switches to minus potential (-)
1 A / 30 V AC/DC
NPN open-collector contact, 100 mA /
24 V DC.
Switches to minus potential (-)
NPN open-collector contact, 100 mA /
24 V DC.
Switches to minus potential (-)
NPN open-collector contact, 100 mA /
24 V DC.
Switches to minus potential (-)
NPN open-collector contact, 100 mA /
24 V DC.
Switches to minus potential (-)
Publicité
