Marshall CODE25 Mode D'emploi page 11

EDITING A PRESET
To edit PRE FX, AMP, MOD, DEL, REV,
POWER and CAB section settings:
• Hold down the Section Switch that you
wish to edit (#14 - #20 in this manual) –
the switch LED will light green.
• The display screen will show the current
preamp, FX, power stage or speaker cab.
• Turn the PRESET selector (#8 in this
manual) to scroll through the section's
preamps, FX, power stages or speaker
cabinets.
Speaker cabinet models are not
!
editable.
• When you have found the preamp, FX or
power stage that you want to edit, push
the PRESET selector to begin editing.
• The display screen will show the
parameter and its current value.
• To edit the parameter value, turn the
PRESET selector.
STORING A PRESET
To store an edited Preset, Store an edited Preset to a new location, and to rename an
edited Preset:
• When you have finished editing, press & hold EXIT/STORE briefly until the Preset name
begins to flash.
• If you wish to store your edited Preset to another location, turn the PRESET selector to
find a new location, then press & hold EXIT/STORE until STORED appears on the display
screen.
Be sure that you want to store to the Preset location that you have selected, as the Preset
!
in that location will be overwritten.
All manuals and user guides at all-guides.com
• To move to the next parameter (if there is
one), press the PRESET selector.
• To edit that parameter value, turn the
PRESET selector.
• Repeat for all parameters and parameter
values of the Sections that you wish to
edit.
• When you are happy with your edited
Preset you can store it to your CODE
amplifier's memory.
To learn how to store an edited Preset,
!
refer to STORING A PRESET in this
manual.
• If you wish exit without storing your edits,
press EXIT/STORE (# 21 in this manual).
This will return you to the main Preset
screen.
• Scroll away from the Preset and it will
revert to its last stored settings.
If you wish to keep your edited settings
!
ensure that you store before moving off
that Preset.
ENGLISH
STORING A PRESET (CONT.)
To rename the edited Preset and store to the current location:
• While the Preset name is flashing, press & hold EXIT/STORE again briefly until the Preset
name is displayed with the cursor flashing at its first letter
• Turn the PRESET selector to change the letter or character.
• When you have found the letter or character you want, push PRESET to select it. The
cursor will automatically move to the next character.
• Repeat until you have renamed the Preset.
The Section Switches act as naming shortcuts:
NAMING SHORTCUTS
PRE FX Clear
AMP Number
MOD Upper / Lower Case A
DEL
Upper / Lower Case
REV
Space
POWER Backspace
CAB Cancel
• To complete the store process, press & hold EXIT/STORE once more until STORED
appears on the display screen. Your edited Preset has now been stored to CODE's
memory.
BLUETOOTH
Pressing REV and POWER Section Switches together (#18 & #19 in this manual) accesses
the Bluetooth pairing function:
®
• The display screen will show 'Bluetooth, pairing enabled' and your CODE amplifier's
pairing ID.
• The blue LED on EXIT/STORE (#21 in this manual) will flash while pairing.
• When paired, the blue LED will stop flashing and remain lit.
• When streaming audio, use the MASTER volume control or your music player to set the
volume level.
Audio streamed via Bluetooth will bypass CODE's panel features, with the exception of
!
MASTER volume.
The Marshall Gateway™ App enables you to control your CODE amplifier remotely and
access Marshall Gateway using your iOS/Android device. Download Marshall Gateway
now from the App Store or Google Play.
ENGLISH