Klarstein SIRLOIN Mode D'emploi page 11

USE AND OPERATION
Before first use
• Before using for the first time, operate the appliance for 10 minutes without any
food. This in order to remove the "new"scent. A small amount of smoke may also be
noticeable. Ventilate the room during this period.
• Let de grill plate and the mini pans cool down en clean them (see chapter Cleaning
and Care).
Preparation
• Remove the grill plate, the pans and the stone plate and clean them with a soft
damp cloth. Place your appliance on a flat and stable surface. Then place the grill
plate or stone plate on top of the appliance.
• Check that the voltage indicated on the product matches your supply voltage.
Before plugging in, make sure that the controller is in the „MIN" OR „OFF"
position.
• When this raclette grill is used for the first time, there may be a smell of smoke from
the surface of the heating element. This is normal during production due to the oily
protective layer.
Operation
• Connect the Raclette Grill to the power supply. Turn the „MIN/OFF" knob or switch
to the „MAX/ON" position. The control lamp will now light up. The raclette set is
then preheated for 5 minutes.
• For slow cooking, place the food on the small pans and then place them on the
base plate. Or place your food directly on the grill plate for grilling.
• When you have finished using the raclette, turn the knob/switch to the „MIN/OFF"
position and pull the plug out of the socket. Wait until the appliance has cooled
down completely before moving or cleaning it.
EN
11