JVC LT-32WX84 Manuel D'instructions page 13

Les langues disponibles

Quick Setup

Step 3 - Connecting your devices

Remove the terminal cover

There are connection terminals behind the covers on the left

and right in the back of the TV. Remove these two covers

before connecting an antenna or other devices. The covers

can be removed by removing the hooks. When replacing the

covers, place the side of the covers against the TV and insert

the hooks.

Note:

• Leave the terminal covers off if they do not fit properly. Do

not force to replace the covers. Doing so may damage the

connection cables and covers.

Connections

Please follow the flow chart below to determine which connection setup is right for you. Then,

refer to the appropriate diagrams to connect your television to other devices that you may have.

After you are finished connecting your devices, plug the power cord into the nearest power

outlet and turn on the TV.

A VCR is not necessary for operation of the television. If you follow these diagrams and the

television does not work properly, contact your local cable operator.

• To connect a DVD player, see Diagram #3. A DVD player is optional.

• If you have a satellite television system, please refer to the satellite TV manual.

��

Connections

��