Publicité
Les langues disponibles
Les langues disponibles
7
Maintenance
7.1
Replacing filter/Refilling blasting material
Disconnect the machine from the mains and turn off the compressed air.
1.
Release the eccentric locks and remove the motor package.
2.
Lift out the dust bucket and the filter (replace as neccesary).
3.
Fill with blasting material. (5 l)
4.
Re-assemble the dust bucket, filter and motor package.
5.
Re-connect the machine to the mains.
6.
Turn on the compressed air again.
7.
Handle the used blaster sand with regards to the materials that have
been blasted. Follow applicable waste regulations. Contact your local
authorities for guidance.
7.2
Spare parts
See chapter Figures.
All manuals and user guides at all-guides.com
SB750
EN
9
Publicité
