Publicité
Les langues disponibles
Les langues disponibles
SLEEP MODE
Pre-setting automatic operating program.
This function is useful for the night as it gradually reduces operation of
the appliance.
●To set this function correctly:
Select the cool or heat mode as described above.
Press SLEEP button to activate the sleep mode, and
on the display.
The SLEEP function can be canceled at any time during operation
by pressing the "SLEEP", "MODE" or "FAN" button.
In FAN or DRY mode, SLEEP function cannot be set.
When you choose the sleep function, the screen will reduce the brightness，
and the fan speed is low.
The SLEEP function maintains the room at optimum temperature without
Excessive fluctuations in either temperature or humidity with silent operation.
Fan speed is always at Low, while room temperature and humidity vary gradually
to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by 1℃(1℉) per hour
in a 2-hour period. This new temperature will be maintained for the next 6 hours.
Then the appliance turns it off.
TIMER MODE----SET TIMER OFF
To set the switching-off auto magically. air conditioner
With the AC on, press the TIMER button and then use the
buttons to set the length of time before the AC will turn off.
Press the timer button again to start the countdown.
Note:To cancel the setted function, press the TIMER button again.
Note:In case of power off,it is necessary to set TIMER OFF again
TCL Air Conditioner Service Manual
25
appears
and
Publicité
