Télécharger Imprimer la page

TCL TAC-09CPB/NZWLN Manuel D'utilisation page 49

Publicité

Les langues disponibles

Les langues disponibles

To avoid possible cuts, avoid contacting the metal parts of the appliance when removing or re-
installing the filter. It can result in the risk of personal injury.
Use a vacuum cleaner to remove dust accumulations from the filter. If it is very dirty, immerse in
warm water and rinse a number of times. The water should never
be hotter than 40℃(104℉). After washing, leave the filter to dry then attach the intake grille to the
appliance.
START-END OF SEASON OPERATIONS
START OF SEASON CHECKS
Make sure the power cable and plug are undamaged and the earth system is efficient.
Follow the installation instructions precisely.
END OF SEASON OPERATIONS
To empty the internal circuit completely of water,
remove the cap.
Run off all water left into a basin. When all the water
has been drained, put the cap back in place.
Clean the filter and dry thoroughly before putting back.
Strictest operation environment:
Cooling mode:
18℃-35℃ (64℉-95℉) , 30%RH~90%RH
Heating mode: 10℃-25℃ (50℉-77℉), 30%RH~90%RH
TCL Air Conditioner Service Manual
18

Publicité

loading

Ce manuel est également adapté pour:

Nz serie