Publicité
Les langues disponibles
Les langues disponibles
● Press the
button a number of times until the Dry symbol appears. The screen display
"
".
● In this mode, fan speed is selected automatically by the appliance and can not be set manually.
SETTING THE TIMER
-This timer can be used to delay the appliance start-up or shutdown, this avoids wasting
electricity by optimizing operating periods.
Programming start up
● Turn on the appliance, choose the mode you want, for example cool, 24℃, high fan speed.
Turn off the appliance.
● Press the Timer button, the
● Press the
button to set the number of hours delay before the appliance comes on. The
timer can set in intervals of 1 hours up to 24 hours.
● A few second after set, the setting is memorized ， the timer indicator is light and the display
shows that the appliance is in standby.
● Press again the Timer button
symbol will disappear from screen.
Programming shut down
● When the appliance is running, press the
● Press the
button to set the number of hours delay before the appliance comes on. The
timer can set in intervals of 1 hours up to 24 hours.
● A few second after set, the setting is memorized ， the timer indicator is light and the display
shows the current mode. At the end of the set time the unit automatically turns to standby mode.
● Press again the Timer button
symbol will disappear from screen.
Switch the unit of temperature
When the appliance is running, hold on " △ " and " ▽ " button together 3 seconds by the same time,
then you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display like fig1.
After change, in cool mode, the screen display like fig2.
The following functions below are optional. Please refer to the real object, just because
these functions only belong to some model.
*USB charging function
●
The USB charging function can be open or closed when you long press the wind speed key for
around 10 seconds.
Press the "FAN" button about 10 seconds, the USB charging function can be open or closed.
If this function is open, the machine will "beep" once, and when you close this function, the
machine will "beep" twice.
*WIFI function:
In the stand-by, press "
●
the appliance will "beep" twice.
Then please refer to Wifi connection specification to connect the appliance. If it is successful, the
Wifi indicator light on operational panel will be lightened.
TCL Air Conditioner Service Manual
symbol and number of hours flash.
or the
button, the timer will be canceled, and the "Timer"
button, the Timer indicator and the hours flash.
or the
button, the timer will be canceled, and the "Timer"
" button six times in four seconds to reset the Wifi signal, so that
15
Publicité
