Publicité
Les langues disponibles
Les langues disponibles
1:Parts:
A) Panel
B) Panel with one hole
C) Panel without hole
D) Screw to lock window kit in place
2: Assembly:
Slide Panel B and C into Panel A and size
to widow width. Windows sizes vary. When
sizing the window width, be sure that the window
kit assembly is free from gaps from gaps and/or
air pockets when taking measurements.
5.Lock the screw into the holes that correspond
With the width that your window requires to
ensure that there are no gaps or air pockets in
the window kit assembly after installation.
LOCATION
● The unit should be placed on a firm foundation to
minimize noise and vibration. For safe and secure
positioning. place the unit on a smooth, level floor strong enough to support the unit.
● The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use
caution
when rolling on carpeted surfaces. Use caution and
Protect floors when rolling over wood floors. Do not
attempt to roll the unit over objects.
● The unit must be placed within reach of a properly rated grounded socket.
● Never place any obstacles around the air inlet or outlet of the unit.
● Allow at least 45cm of around and above space away from the wall for efficient working.
● The hose can be extended, but it is the best to keep the length to minimum required. Also make
sure that the hose does not have any sharp bends or sags.
TCL Air Conditioner Service Manual
INSTALLATION C
13
Publicité
