Publicité
Les langues disponibles
Les langues disponibles
4.3. Overview of functions
Standby button
Temperature
setting
Mode button
Timer button
NOTE
This appliance has an overheating protection. If the indoor temperature is higher than
50 °C, an audible signal sounds and the display shows 'FF'. The appliance is then
automatically switched off and cannot be operated anymore.
Allow the appliance to cool down and remove the plug from the socket. After this, the
appliance can be switched on again.
USER MANUAL
Press the 'Standby' button to turn the appliance on, or set it to standby mode. When
switching on, an audible signal sounds.
By removing the plug from the socket, the appliance switches off completely.
If the appliance is put on standby and the plug remains in the socket, the appliance will be
set to the last set temperature when it is switched on again.
Press the Plus button to raise the temperature, press the Minus button to lower the
temperature.
The temperature can be set from 7oC to 35oC, in steps of 1oC. Each time the setting
changes, an audible signal sounds, and the degree symbol blinks. When the desired
temperature is set, the symbol stops blinking.
If the appliance is put on standby and then switched on again, the temperature remains set
to the last set temperature.
Use the 'Mode' button to set the capacity: low, medium, high. The capacity can be set by
pressing the 'Mode' button several times. The indicator on the display shows the chosen
capacity: one stripe for low, two stripes for medium, three stripes for high.
Position 1: 1000 W
Position 2: 1500 W
Position 3: 2500 W
With the help of the timer, the appliance can be switched on and off automatically after a
certain time. This can be done both with the remote control and on the appliance itself.
The appliance can only be set to turn on or off automatically, not both.
Turn the appliance on after a set time
Turn the appliance on to set the desired temperature.
Switch off the appliance (standby mode).
Then briefly press the Timer button (in standby mode).
The timer can be set from one to 24 hours. The hours can be set by pressing the Plus and
Minus button.
While setting, the timer indicator flashes, when the indicator stops flashing, the timer is
set. When the timer is set, the indicator above the timer symbol lights up, and the display
indicates the set number of hours.
The timer can be turned off by setting the hours to 0 hours, or by pressing the Standby
button several times.
Turn the appliance off after a set time
To set the off-timer, press the Timer button when the appliance is turned on. The timer can be
set from one to 24 hours. The hours can be set by pressing the Plus and Minus button. While
setting, the timer indicator flashes, when the set temperature is visible again, the timer is set.
If the timer is set, the indicator above the 'Timer' symbol lights up.
When the timer is set, the temperature can be adjusted if desired.
The timer can be turned off by setting the hours to 0 hours, or by pressing the Standby
button.
25
Publicité
