15.2 Panel
A
Button Seal only (Schweißen)
For sealing the bag without vacuum
B
Vacuum & Seal (Vakuum & Schweißen)
draws air out of the bag and automatically changes operation to seal the bag after vacuum
is completed
C
Stop (Stopp)
switches off the vacuuming and sealing action whenever the operator wants to stop the
operation
15.3 Rating plate
The rating plate with the connection and performance data can be founded on the back of
the device.
16 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
16.1 Operating Instructions
After each sealing session and before starting up, check to make sure the unit and all
accessories that come in contact with the foodstuff are thoroughly clean. Follow the
cleaning instructions at chapter "cleaning".
Step 1: Open the cover and place an open side of the
bag in the vacuum chamber.
Step 2: Close the cover. Turn the
lever clockwise until the cover is
latched.
38