Publicité
6. Turning your headset on and off
GB
• Press the answer/end button to turn on your headset.
F
• Press and hold the answer/end button to turn off your headset.
7. Pair it with your phone
ES
Before you use your Jabra BT125, you need to pair it with your mobile
PT
phone. (Follow step 1-4 in fig 3).
1. Put the headset in pairing mode
DE
• Make sure the headset is off .
• Press and hold the answer/end button until a solid blue light comes on.
IT
2. Set your Bluetooth phone to 'discover' the Jabra BT125
Follow your phone's instruction guide. This usually involves going to a
NL
'setup, ' 'connect' or 'Bluetooth' menu on your phone and selecting the
option to 'discover' or 'add' a Bluetooth device.* (See example from a
SU
typical mobile phone in fig. 3)
3. Your phone will find the Jabra BT125
NO
Your phone then asks if you want to pair with it. Accept by pressing
'Yes' or 'OK' on the phone and confirm with the passkey or PIN = 0000
SE
(4 zeros).Your phone will confirm when pairing is complete. In case of
unsuccessful pairing, repeat steps 1 to 3.
DK
8. Wear it how you like it
GR
The Jabra BT125 is ready to wear on your right ear. If you prefer the left,
gently pull out the earhook, rotate the ear hook 180°, and insert. (See fig 4).
The earhook can be adjusted to fit your ear better – squeeze the back edge
of the earhook for a more secure fit.
For optimal performance, wear the Jabra BT125 and your mobile phone on
the same side of your body or within line of sight. In general, you will get
better performance when there are no obstructions between your headset
and your mobile phone. (See fig 5).
9. How to...
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will (subject to
phone settings) automatically transfer to your headset. If your phone
does not support this function, tap on the answer/end button on the
All manuals and user guides at all-guides.com
RELEASE YOUR JABR A
Jabra BT125 to receive the call in the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person who
called you will either be forwarded to your voice mail or hear a
busy signal.
Activate voice dialing*
• Tap the answer/end button. For best results, record the voice-dialing
tag through your headset if your phone allows you to do so. Please
consult your phone's user manual for more information about using
this feature.
Redial last number*
• Press the answer/end button.
Adjust sound and volume
• Press the volume up or down (+ or -) to adjust the volume.
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer a waiting call.
• Press the answer/end button once to put the active call on hold and
answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.
* Phone dependent
10. What the lights mean
What you see
What is the mean about your headset
Flashing blue light
Flashing every second: active on a call
Flashing blue light
Flashing every three seconds: in standby mode
Flashing blue light
Running low on battery
Solid blue light
Charging
Solid blue light
In pairing mode – see section 7
11. Troubleshooting & FAQ
I hear crackling noises
For the best audio quality, always wear your headset on the same side of the
body as your mobile phone.
I cannot hear anything in my headset
• Increase the volume on the headset.
• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset – if it does not
Jabra BT125 Bluetooth headset
G
E
P
D
N
S
N
S
D
G
Publicité
