Publicité
Les langues disponibles
Les langues disponibles
5-1. FUEL
Use regular grade unleaded gasoline mixed with Genuine
Factory Parts 40:1 custom 2-cycle engine oil for best
results. Use mixing ratios in Section 5-3.
Never use straight gasoline in your unit. This will
cause permanent engine damage and void the man-
ufacturer's warranty for that product. Never use a fuel mix-
ture that has been stored for over 90 days.
If 2-cycle lubricant other than Genuine Factory Parts
Custom Lubricant is to be used, it must be a premi-
um grade oil for 2-cycle air cooled engines mixed at a 40:1
ratio. Do not use any 2-cycle oil product with a recom-
mended mixing ratio of 100:1. If insufficient lubrication is
the cause of engine damage, it voids the manufacturer's
engine warranty.
5-2. MIXING FUEL
Add oil to an approved fuel container followed by the gaso-
line to allow incoming gasoline to mix with oil. Shake con-
tainer to ensure thorough mix.
Lack of lubrication voids engine warranty. Gasoline
and oil must be mixed at 40:1.
5-3. FUEL MIXING TABLE
All manuals and user guides at all-guides.com
5 - FUEL AND LUBRICATION
5-4. RECOMMENDED FUELS
Some conventional gasolines are being blended with oxy-
genates such as alcohol or an ether compound to meet
clean air standards. Your McCulloch engine is designed to
operate satisfactorily on any gasoline intended for automo-
tive use including oxygenated gasolines.
5-5. FUEL AND LUBRICATION SYMBOLS
Gasoline and Oil
Mix 40:1
8
Publicité
