Publicité
DRIP COFFEE
Setting the CLOCK
1
Press and hold HOUR button for
3 seconds until the hours fl ash on the
display. Push the button repeatedly until
desired time is set.
Programing the AUTO Start
1
2
Press and hold AUTO
Press HOUR and/or MIN
button for 3 seconds
buttons repeatedly until
until the display fl ashes.
desired time is set.
2
To set minutes press the MIN button
repeatedly until desired time is set.
3
To activate/deactivate auto
program, press AUTO button.
8
DESCALING DRIP SIDE
1
2
When BOLD light fl ashes
Remove the fi lter during the
twice, it's time to descale
descaling process.
the DRIP side.
4
Pour water into the water fi ll compartment
–
MAX
1 0
–
up to the max level. After pouring replace
8
–
6
–
the carafe back to the warming plate.
MIN
4
Note: Run the machine 3 times with 3 full carafes of
3
–
MAX
1 0
–
Pour Descaler (100 ml) into the
8
–
6
water fi ll compartment.
–
MIN
4
5
Press and hold the BOLD button for
6 seconds. The brew on/off button will
start blinking to let you know the descaling
process has begun.
fresh water without the use of coffee grounds.
COM532M
9
Publicité
