All manuals and user guides at all-guides.com
This marking indicates that this product should not
be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return
and collection systems or contact the retailer where the
product was purchased. They can take this product for
environmental safe recycling.
· Appliances that are no longer used should be
rendered unusable.
· Unplug the appliance and cut the power cable.
· Appliances no longer in use must be taken to a
suitable waste collection facility so that the special
components contained in the appliance may be duly
disposed of.
· The "TEM - Module" (or Peltier's cell) must be
disposed of in accordance with the regulations
currently in force in the user's country.
12 Troubleshooting
Problem
The appliance
does not turn
on.
You can not fit
the BeerTender
Keg tap in the
tapping unit.
You can not
close the tap
cover.
No beer is being
dispensed.
Possible causes
The appliance is
not connected to
the mains power
supply.
The BeerTender
Keg tap has been
activated by hand.
The BeerTender
Keg tap is not
inserted correctly.
The BeerTender
Keg is empty (last
level of volume
indicator is
blinking).
20
Remedies
Connect the
appliance to the
power supply.
Put the BeerTender
Keg tap back in its
original position.
Remove the
BeerTender Keg tap
from the appliance
and fit it again
following chapter
6 – Using the
BeerTender.
Replace the
BeerTender Keg
with a new one.